Industrial water users guzzle a whopping 20 percent of all the water consumed around the world. That’s why water reuse on a large, industrial scale is so critical when it comes to making significant improvements in water conservation.
Currently, the demand of Hydrogen is increasing dramatically all over the world. Hydrogen traditionally has been used for the cracking process in Oil Refineries and for material surface treatment, but now it is also needed for desulfurization in Oil Refining Processes, and also as fuel. Also, at this time, the demand for Hydrogen is strongly led by environmental requirements.
Большая часть производимой в мире электроэнергии используется для приведения в действие насосов. Например, электроприводные насосы потребляют до 30% мощности, расходуемой для добычи нефти на существующих промыслах нефтяных месторождений Западной Сибири. Стоимость электроэнергии составляет 85% эксплуатационных расходов насосов для поддержания пластового давления (ПДД), установленных на этих нефтяных месторождениях. С ростом требований к энергосбережению и увеличению добычи нефти, конечные потребители ищут технологии насосов, позволяющие им достигать данных целей с минимальными капиталовложениями и максимальной окупаемостью.
Plate heat exchangers have been used for many years in the hydrocarbon industry. The advantages of plate heat exchangers became even clearer after the introduction of the gasket free all welded plate heat exchangers in the early nineties. However the traditional all welded heat exchangers with square / rectangular plates (the four corner grid design) suffers from thermal and pressure fatigue due to the weak corner welds that often fails in dynamic processes which results in unexpected shut down and maintenance. Therefore this design should be replaced by more reliable shell & plate heat exchangers in order to improve reliability and availability in the hydrocarbon industry.
Steve Bakas, Global HPI/CPI Marketing Director at GE Power & Water, on why optimizing the water network in a refinery or petrochemical plant needs a systematic analysis of the entire facility enabled by an understanding of the interactions within the plant.
Стив Бакас из компании GE Power & Water рассказывает, почему оптимизация сетей водоснабжения на НПЗ или нефтехимическом заводе требует систематического анализа всего комплекса, проводимого с учетом взаимодействия различных процессов на заводе.